In this guide
This comparison is about fit, not a winner.
Selection
The P150 and P60 share the XAG task-system logic. The difference is throughput versus transportability, and the operating scale each one supports.

Quick answer
P150 is the throughput choice: 70 kg payload, RTK ±10 cm, 30 L/min maximum flow and 280 kg/min maximum spread. P60 is the transport choice for smaller or fragmented plots. Compare the full scope and a field demonstration before the order.
In this guide
This comparison is about fit, not a winner.
P150
The P150 carries a 70 kg payload, 70 L liquid tank and 115 L granule hopper. Maximum flow is 30 L/min and maximum spread rate is 280 kg/min. It is the platform for larger blocks and contractors who need to finish a window quickly.
P60
The P60 is the compact member of the family, aimed at smaller or fragmented plots where transport and manoeuvrability matter more than maximum output. Tank and payload are agreed for your market configuration.
Compare
| Consideration | P150 | P60 |
|---|---|---|
| Payload | 70 kg | Ask our team |
| Tank / hopper | 70 L / 115 L | Ask our team |
| Throughput | Higher | Lower, but easier to move |
| Transport | Pickup, folded arms | More compact |
| Best fit | Large blocks, contractors | Small or fragmented plots |
Decision
Demo
A demonstration on your block shows the refill cycle, transport and coverage in your conditions. That is more reliable than a payload comparison on paper.
Key takeaways
Related guides
Most agricultural drone comparisons start with payload. That is the wrong first question. The right first question is: which job do you need to repeat, on which blocks, with what support?
ApplicationA spraying drone listing usually leads with tank size and maximum flow. Those numbers matter, but they do not tell you how many hectares you will finish in a day.
BuyingA commercial drone quotation can look simple: aircraft, batteries, charger. The differences that decide the total cost are usually outside that list — guidance, spare parts, training, export terms and support.
Next step
Send the plot sizes, crop and transport constraints. We will recommend P150 or P60 and the module set.